India's Most Specified PET Felt Acoustic Panels in Auckland
Echsorbix polyester acoustic panels in Auckland are manufactured from 100% recycled PET and dyed polyester in MMT Acoustix's Haryana facility. These recycled acoustic panels offer a completely safe, VOC-free, and sustainable alternative to Rockwool or foam. PET acoustic panel in Auckland from MMT Acoustix achieves NRC up to 0.60 while delivering premium aesthetic flexibility as acoustic felt wall panels with 40 colour options and printable surface finishes.
- +100% recycled PET and dyed polyester. VOC-free and non-toxic
- +NRC 0.30 to 0.60 across 9mm to 24mm. ASTM C-423 and ISO 354 certified
- +EN-13501 Class A and Class B fire rated. Acoustic felt wall panels that meet fire compliance for Auckland commercial projects
- +Moisture-resistant, termite-resistant, and mould-free
- +Thermal insulation benefit. Reduces energy load in Auckland's climate
- +1500 to 3600 GSM across 9mm to 24mm. Multiple performance tiers
- +Printable surface. Custom artwork, branding, and patterns available
NRC by Thickness in Auckland (ASTM C-423 / ISO 354)
All NRC values independently certified per ASTM C-423 and ISO 354. Echsorbix polyester acoustic panels in Auckland achieve higher real-world absorption than foam at equivalent thicknesses due to superior fibre density. NRC 0.60 at 24mm is the maximum absorption rating for recycled acoustic panels in Auckland. These acoustic felt wall panels are available in 9mm to 24mm thicknesses.
Need support? Ask MMT Consultant.
Get instant advice on PET acoustic panels and Auckland delivery.
Technical Specs and Performance Data for Auckland
All values independently certified. ASTM C-423, ISO 354, and EN-13501 documentation available for Auckland project submissions.
1500 to 3600 GSM Engineered for Every Application
GSM determines the density, stiffness, and acoustic mass of each PET acoustic panel in Auckland. MMT Acoustix manufactures polyester acoustic panels in Auckland as recycled acoustic panels and acoustic felt wall panels across the full 1500 to 3600 GSM range, each tier engineered for a specific performance category.
Ideal for offices, retail, and F&B spaces where aesthetic accent and light echo control are the primary goal. Easy to handle and cut on-site.
The most widely specified tier for Auckland offices, classrooms, and residential interiors. Balanced acoustic performance and ease of installation.
Preferred for home theatres, recording studios, and hotel conference suites in Auckland where higher acoustic mass improves mid-frequency absorption.
Highest-density tier for broadcast studios, auditoriums, and noise-sensitive Auckland projects where maximum panel mass is required.
Made in India 100,000 Sqft Facility, Haryana
Echsorbix polyester acoustic panels in Auckland are manufactured in MMT Acoustix's 100,000 sqft European-standard facility in Haryana. Raw recycled PET bottles are processed into polyester fibres, needle-punched into high-density acoustic felt wall panels, cut to specification, and quality-tested before dispatch. These recycled acoustic panels carry EN-13501 Class A and Class B fire certification.
100% post-consumer recycled PET bottles processed into polyester fibre. Zero virgin plastic used in any Echsorbix panel.
European-standard needle-punch looms interlace fibres into dense felt structures. Thermo-bonding ovens fuse panels to target GSM and thickness with +/- 5% tolerance.
Fibres are solution-dyed before bonding, ensuring colour uniformity throughout the panel depth. No colour fading or peeling under Auckland's climate conditions.
Every batch tested for NRC, fire rating, and GSM before dispatch. ASTM C-423 and ISO 354 test reports, EN-13501 fire certificates issued. Packed and dispatched to Auckland within 7 business days.
Where Echsorbix PET Panels Perform Best
The combination of acoustic performance, aesthetic flexibility, and VOC-free safety makes PET acoustic panels in Auckland the preferred specification for interior designers and architects across CBD, Ponsonby, and Parnell. These recycled acoustic panels and acoustic felt wall panels are specified by fit-out contractors throughout Auckland.
Need support? Ask MMT Consultant.
Get instant advice on PET acoustic panels and Auckland delivery.
Three Installation Methods for Auckland Projects
Echsorbix PET panels are lightweight, flexible, and easy to install without specialist tools. Cut to any shape on-site with a sharp knife. Full guide included with every Auckland order.
Apply MMT Acoustix Turbo SR Adhesive to the back of the panel in a serpentine bead pattern. Press firmly to wall or ceiling for 30 to 60 seconds. Best for concrete, gypsum board, and brick surfaces in Auckland.
Apply heavy-duty double-sided mounting tape to the panel perimeter and centre. Ideal for rental properties in Auckland where walls must not be permanently bonded.
Drive nails or panel pins through the panel face directly into timber stud walls, MDF boards, or wooden ceilings. The felt surface self-conceals nail heads without visible damage.
Mark panel layout with a pencil and level before fixing. Coverage guide: 15 to 25% restaurants and offices, 30 to 50% studios and bedrooms, 60 to 80% home theatres. Use M.A.A.C. for exact quantities.
Echsorbix PET felt cuts cleanly with any sharp utility knife or box cutter. No power tools or specialist equipment needed. Trim on-site to fit around switches, sockets, and door frames. Edges remain clean.
40 Colour Shades for Auckland
Echsorbix polyester acoustic panels in Auckland are available in 40 standard colour shades as acoustic felt wall panels. Custom colours, printed artwork, gradient effects, and branded panel designs are available for Auckland project minimum order quantities. All recycled acoustic panels are colour-through with no fading.
India's Leading PET Acoustic Panel Manufacturer
Direct from our Haryana factory. No middlemen. ASTM and ISO certified. 14 to 18 day total delivery to Auckland. Echsorbix PET felt acoustic panels in Auckland from MMT Acoustix are available with no minimum order quantity.
All Echsorbix PET panels manufactured in-house with European-standard machines. Complete quality control from raw PET fibre to finished panel. No outsourcing.
Recycled acoustic panels made from post-consumer PET bottles. VOC-free, non-toxic, and safe for children's environments. Preferred by LEED and WELL certified projects in Auckland.
ASTM C-423, ISO 354, and EN-13501 Class A and Class B fire certification documentation for Auckland project submissions. NRC data sheets and fire certificates on every order.
7 days production plus 7 to 10 days transit via Aramex or DHL. Full HS code and customs documentation on every shipment.
More design flexibility than any other acoustic material. Standard shades, custom colours, branded prints, and CNC-cut profiles for Auckland's luxury interior market.
India-New Zealand bilateral trade. PET acoustic panels imported under this agreement may attract reduced customs duty.
Exact Bill of Quantities for PET acoustic panels in Auckland within 24 hours at no cost. Physical samples of polyester acoustic panels in Auckland dispatched free of charge.
Mahabir Multi Tech Pvt Ltd since 1986. Third-generation manufacturing supplying acoustic panels across 20+ countries including Auckland.
Echsorbix PET Panels in Auckland Common Questions
Your Auckland Project
Share your room dimensions and acoustic targets. We provide exact quantities, colour options, and pricing for PET acoustic panel in Auckland, polyester acoustic panels in Auckland, and acoustic felt wall panels within 24 hours. 7 days production plus 7 to 10 days transit. Total 14 to 18 business days to Auckland.