MMT Acoustix — PVC Gripper Profiles
🇦🇷  Delivering to Argentina

PVC Grippers
for Fabric Wall Panelling
in Argentina

Extruded PVC profile rails that hold acoustic fabric taut against the wall — the hardware behind clean, fabric-wrapped acoustic wall systems for home theatres, cineplexes, auditoriums and offices. Three sizes for any fabric thickness, custom lengths, any volume supplied to Argentina.

3
Gripper Sizes — 12 · 25 · 50 mm
Match the gripper depth to your fabric weight and panel build for a clean, taut acoustic wall finish
PVC grippers fabric wall panelling Argentina MMT Acoustix
Technical Specification

The Hardware Behind
Fabric-Wrapped Walls

PVC gripper rails frame the perimeter of a fabric-wrapped acoustic wall panel. Fabric is stretched across an acoustic core — PET felt, mineral wool or similar — and tucked into the grippers for a taut, edge-clean finish.

Material
Extruded PVC profile
Product Type
Fabric gripper rail for wall panelling
Sizes
12 mm · 25 mm · 50 mm
Function
Holds fabric edges taut for clean acoustic wall panels
Layout
Wall perimeter, ceiling line, corners — frame any panel shape
Mounting
Surface fix to wall or substrate — screw or adhesive
Acoustic Core
Pairs with Echsorbix® PET felt, mineral wool or similar
Lengths
Cut to project
Supply
Any volume — single rail to full-room kits, delivered to Argentina
PVC gripper wall fabric panelling acoustic Argentina
The Range

Three Gripper Sizes,
One Clean Finish

Pick the gripper depth to match your fabric weight and the thickness of the acoustic core behind it. All three sizes install the same way — only the fabric tuck depth changes.

12 mm
Shallow Profile
Best ForThin acoustic fabric, low-profile panels
Panel DepthUp to ~12 mm core
MountingSurface fix
UseTight corners, slim trim lines
25 mm
Standard Profile
Best ForStandard acoustic fabric wall panels
Panel DepthUp to ~25 mm core
MountingSurface fix
UseMost home theatre & office builds
50 mm
Deep Profile
Best ForHeavy fabric, deep panel builds
Panel DepthUp to ~50 mm core
MountingSurface fix
UseCineplex, auditoriums, deep bass traps
How It Works

From Bare Wall
to Acoustic Panel

A fabric-wrapped acoustic wall is built in three layers. The gripper frames the panel, the core absorbs sound, the fabric finishes it.

1 · Frame the Panel
Fix PVC grippers around the panel perimeter — wall edges, ceiling line and any internal divisions.
Surface fix
2 · Fit the Core
Set the acoustic core inside the frame — Echsorbix® PET felt, mineral wool or similar absorber.
Absorbs sound
3 · Tuck the Fabric
Stretch acoustic fabric over the core and tuck the edges into the grippers for a taut, clean finish.
Clean edge
Benefits

Taut, Tidy
and Reversible

🔩
Taut Fabric Finish
Grippers hold the fabric tension so panels read flat and upholstered, with no sag.
📏
Three Sizes
12, 25 and 50 mm depths to suit any fabric weight and panel build.
✨
Clean Edges
The fabric tuck hides raw edges and fixings for a furniture-grade finish.
🛠️
Easy Install
Surface-fix rails and a tucking tool — fast for integrators and accessible to DIY.
♻️
Reversible Fabric
Fabric can be untucked for cleaning, repair or re-skin without rebuilding the panel.
🔇
Works With Any Core
Pairs with Echsorbix® PET, mineral wool or any standard acoustic absorber.
Applications

Specified Across
Argentina Interiors

Anywhere a fabric-wrapped acoustic wall is the finish — home theatres, performance spaces, studios and corporate rooms.

Home Theatres
Full-wall acoustic treatment that disappears behind a clean fabric finish.
Reference rooms
Cineplexes & Cinemas
Deep panel builds for screen-wall and side-wall absorption in commercial cinemas.
Deep panels
Auditoriums
Performance halls and lecture spaces where speech clarity and aesthetics both matter.
Speech clarity
Conference & Boardrooms
Discreet acoustic treatment that reads as a designed wall, not a panel.
Discreet finish
Recording Studios
Custom geometry and bass-trap depths in fabric-wrapped builds.
Custom builds
Corporate Offices
Meeting rooms and feature walls where the acoustic layer reads as a finish, not a fix.
Feature walls
Installation

Frames in Minutes,
Fabric Tucks Clean

Two-stage build — fix the gripper frame, then dress the fabric. No specialist trade required.

Method 01
Surface Fix the Frame
1
Mark the panel
Set out panel perimeter on the wall — straight runs, corners and internal divisions.
2
Cut to length
Cut PVC rails to fit, mitre the corners or use joining pieces.
3
Fix to wall
Screw or adhesive-bond the grippers around the panel outline.
Method 02
Core & Fabric Finish
1
Set the core
Drop the acoustic core into the frame — PET felt, mineral wool or similar.
2
Tuck the fabric
Stretch fabric over the core and tuck edges into the gripper with a tucking tool.
3
Inspect & finish
Check tension, trim excess fabric — done. Re-skin later by untucking the same way.
MAAC · MMT Acoustic Advisory

Free gripper layout & quantity take-off for your Argentina project

Share your wall plan and panel sizes. We return a gripper layout, linear-metre take-off and a clear bill of quantities.

Request a Layout & BOQ →
FAQs

PVC Grippers
in Argentina — Answered

Can I buy PVC grippers in Argentina from MMT Acoustix?+
Yes — PVC gripper rails supplied to Argentina in any volume, from a single rail to full-room kits, with freight, free samples and free layout support.
What are the three sizes for?+
12 mm for thin fabrics and slim panels, 25 mm for standard fabric wall panels, 50 mm for heavy fabrics and deeper panel builds like cinemas and bass traps.
What acoustic core goes behind the fabric?+
Any standard absorber — Echsorbix® PET felt or mineral wool are the most common. Pick the core to match your acoustic target and the gripper to match the core depth.
How are PVC grippers installed?+
Surface-fix the rails around the panel perimeter (screw or adhesive), set the core inside, then stretch fabric over and tuck the edges into the grippers with a tucking tool.
What volume can you supply to Argentina?+
Any volume — single rail to full-room kits — shipped to Argentina by air or sea freight. Share your wall plan for a linear-metre take-off and quote.
Get a Quote
Need PVC Grippers
Delivered to Argentina?

Share your wall plan or panel sizes. Get a free gripper layout, linear-metre take-off and samples in 12, 25 and 50 mm. Any volume supplied to Argentina.

Shop Now → Get Free Quote Contact Sales

Any volume supplied to Argentina  ·  Air & Sea Freight  ·  Extruded PVC · 12 · 25 · 50 mm · Fabric-Wrapped Acoustic Walls · Custom Lengths