Turbo® SR Adhesive Foam Tech, For Acoustic Panels, 410 ml

Turbo® SR Adhesive Foam Tech is a synthetic rubber adhesive formulated specifically for acoustic panels. It grabs fast on porous open-cell surfaces such as acoustic foam and PET felt, where general-purpose adhesives either soak in or fail to hold, and stays flexible once cured so panels do not lift at the edges over time.

Available in 410 ml, 5 L and 23 L containers.
Coverage is approximately 21 sq ft per litre on walls and 18 sq ft per litre on ceilings.
A 410 ml can covers roughly 8.6 sq ft on walls or 7.4 sq ft on ceilings.
To calculate what you need, divide your total area in square feet by 21 for walls or by 18 for ceilings. The result is the number of litres required.

Apply the adhesive to both surfaces, the back of the panel and the wall or ceiling. Use a generous amount for best results. Press the two surfaces together firmly, hold for 10 seconds, then release and leave. No clamping or additional support is required. Work in a well-ventilated area.

Contains a strong odour. Ventilate the area for 24 hours after use. Store upright in a cool, dry place away from direct heat and open flame. Keep out of reach of children. Wash immediately with soap and water on contact with skin or eyes.Contains a strong odour. Ventilate the area for 24 hours after use. Store upright in a cool, dry place away from direct heat and open flame. Keep out of reach of children. Wash immediately with soap and water on contact with skin or eyes.