Arch PET Acoustic Panel | 4x2 feet | Pumice

This was my first proper acoustic treatment for the home office, so I started with a simple layout. I was looking for a solution that could soften the acoustics without turning the home office into a technical-looking studio. The arch PET panels appealed to me because the treatment could become part of the interior rather than something I would want to hide. Before ordering, I spent time on the MMT Acoustix website comparing the use case, size and basic installation information. That helped set the right expectation: PET acoustic treatment is mainly about controlling reflections and reverberation inside the room, not creating a complete barrier against noise coming through walls, doors or windows. When the order arrived, the first thing I noticed was the consistency of the felt surface and the cut edges. I laid the pieces out on the floor before fixing anything so I could check spacing and alignment. That small step made the final installation look much more deliberate. Colour consistency was good across the pieces in my order, especially in Pumice. The 4x2 feet format worked well for my layout, although I would recommend calculating actual coverage rather than estimating quantity only from a photograph of the wall. For installation, I marked the layout first and checked the wall surface before choosing the fixing method. Adhesive felt more suitable for my permanent arrangement, while I would test any tape first on painted walls rather than assuming it will behave the same everywhere. The acoustic change was easiest to notice during speech. The room has less lingering energy after a sentence, calls feel clearer, and sharp reflections are reduced. It is not silence and it is not soundproofing, but it is the kind of improvement I was actually trying to achieve. Packaging on my order was protective and the panels reached in usable condition. I also appreciated being able to speak with someone for a practical placement question instead of relying only on generic marketplace descriptions. There were cheaper felt products available online, but I was more comfortable buying from a company focused on acoustics. Once I considered the finish, product information, packaging and support, the pricing felt competitive rather than simply expensive. If I were doing the room again, I would start by identifying the most reflective surfaces, treat a sensible area, listen to the change and then add more only if required. That approach gives a better result than covering every wall without a plan.

I used these in my studio after struggling with a fairly reflective room. The Pumice shade sits well with the rest of the interior.

We installed these in a studio where speech was bouncing off too many hard surfaces. I was looking for a solution that could soften the acoustics without turning the studio into a technical-looking studio. The arch PET panels appealed to me because the treatment could become part of the interior rather than something I would want to hide. Before ordering, I spent time on the MMT Acoustix website comparing the use case, size and basic installation information. That helped set the right expectation: PET acoustic treatment is mainly about controlling reflections and reverberation inside the room, not creating a complete barrier against noise coming through walls, doors or windows. When the order arrived, the first thing I noticed was the consistency of the felt surface and the cut edges. I laid the pieces out on the floor before fixing anything so I could check spacing and alignment. That small step made the final installation look much more deliberate. I specifically chose Pumice, and it looks balanced under normal room lighting. The 4x2 feet format worked well for my layout, although I would recommend calculating actual coverage rather than estimating quantity only from a photograph of the wall. For installation, I marked the layout first and checked the wall surface before choosing the fixing method. Adhesive felt more suitable for my permanent arrangement, while I would test any tape first on painted walls rather than assuming it will behave the same everywhere. The acoustic change was easiest to notice during speech. The room has less lingering energy after a sentence, calls feel clearer, and sharp reflections are reduced. It is not silence and it is not soundproofing, but it is the kind of improvement I was actually trying to achieve. Packaging on my order was protective and the panels reached in usable condition. I also appreciated being able to speak with someone for a practical placement question instead of relying only on generic marketplace descriptions. There were cheaper felt products available online, but I was more comfortable buying from a company focused on acoustics. Once I considered the finish, product information, packaging and support, the pricing felt competitive rather than simply expensive. If I were doing the room again, I would start by identifying the most reflective surfaces, treat a sensible area, listen to the change and then add more only if required. That approach gives a better result than covering every wall without a plan.

Surprisingly decent finish

We installed these in a studio where speech was bouncing off too many hard surfaces. I noticed this most during late-day music playback around the workstation.