BassBloc Bass Absorber | 6x3 feet, 40mm

BassBloc 40mm is our heaviest bass absorber, at double the thickness of the 20mm. Built for low and mid frequency sound absorption, the extra depth pushes performance further down the frequency range, making it the choice for studios, home theatres and any room with a genuine bass problem.

NRC 1.00 tested to ASTM C-423. Install beneath your finish layer and cover fully with acoustic panels, gypsum or wooden panelling. BassBloc should never be left exposed.

6x3 ft roll at 40mm thickness, covering 18 sq ft. Density 100 kg per cubic metre. NRC 1.00 to ASTM C-423.

Supplied rolled in a 95 x 35 x 35 cm box.

Fix with Turbo SR Adhesive directly onto the wall or ceiling, or fit inside a framework. Butt the edges together so there are no gaps.

Cover completely with acoustic panels, gypsum board or wooden panelling. BassBloc is a barrier layer and must not be left exposed.

Once installed and covered, no maintenance is required. Clean gently with a soft brush or vacuum before fixing the finish layer. Handle carefully to avoid tearing the surface.Once installed and covered, no maintenance is required. Clean gently with a soft brush or vacuum before fixing the finish layer. Handle carefully to avoid tearing the surface.