FeltPin Acoustic Bulletin Board 1 x 1 Feet | Pumice

I chose this product for a planning area because I wanted the acoustic treatment to also look intentional. I was looking for a solution that could soften the acoustics without turning the planning area into a technical-looking studio. The felt bulletin boards appealed to me because the treatment could become part of the interior rather than something I would want to hide. Before ordering, I spent time on the MMT Acoustix website comparing the use case, size and basic installation information. That helped set the right expectation: PET acoustic treatment is mainly about controlling reflections and reverberation inside the room, not creating a complete barrier against noise coming through walls, doors or windows. When the order arrived, the first thing I noticed was the consistency of the felt surface and the cut edges. I laid the pieces out on the floor before fixing anything so I could check spacing and alignment. That small step made the final installation look much more deliberate. The Pumice finish gave the wall enough contrast without looking loud. The 1 x 1 Feet format worked well for my layout, although I would recommend calculating actual coverage rather than estimating quantity only from a photograph of the wall. I also wanted the wall to remain practical, so the felt bulletin-board format was useful for notes and planning around the desk while giving the hard wall some acoustic softness. The acoustic change was easiest to notice during speech. The room has less lingering energy after a sentence, calls feel clearer, and sharp reflections are reduced. It is not silence and it is not soundproofing, but it is the kind of improvement I was actually trying to achieve. Packaging on my order was protective and the panels reached in usable condition. I also appreciated being able to speak with someone for a practical placement question instead of relying only on generic marketplace descriptions. There were cheaper felt products available online, but I was more comfortable buying from a company focused on acoustics. Once I considered the finish, product information, packaging and support, the pricing felt competitive rather than simply expensive. If I were doing the room again, I would start by identifying the most reflective surfaces, treat a sensible area, listen to the change and then add more only if required. That approach gives a better result than covering every wall without a plan. I noticed this most during weekend podcast sessions from the centre of the room.

I used these in my workstation after struggling with a fairly reflective room. I was looking for a solution that could soften the acoustics without turning the workstation into a technical-looking studio. The felt bulletin boards appealed to me because the treatment could become part of the interior rather than something I would want to hide. Before ordering, I spent time on the MMT Acoustix website comparing the use case, size and basic installation information. That helped set the right expectation: PET acoustic treatment is mainly about controlling reflections and reverberation inside the room, not creating a complete barrier against noise coming through walls, doors or windows. When the order arrived, the first thing I noticed was the consistency of the felt surface and the cut edges. I laid the pieces out on the floor before fixing anything so I could check spacing and alignment. That small step made the final installation look much more deliberate. The Pumice finish gave the wall enough contrast without looking loud. The 1 x 1 Feet format worked well for my layout, although I would recommend calculating actual coverage rather than estimating quantity only from a photograph of the wall. I also wanted the wall to remain practical, so the felt bulletin-board format was useful for notes and planning around the desk while giving the hard wall some acoustic softness. The acoustic change was easiest to notice during speech. The room has less lingering energy after a sentence, calls feel clearer, and sharp reflections are reduced. It is not silence and it is not soundproofing, but it is the kind of improvement I was actually trying to achieve. Packaging on my order was protective and the panels reached in usable condition. I also appreciated being able to speak with someone for a practical placement question instead of relying only on generic marketplace descriptions. There were cheaper felt products available online, but I was more comfortable buying from a company focused on acoustics. Once I considered the finish, product information, packaging and support, the pricing felt competitive rather than simply expensive. If I were doing the room again, I would start by identifying the most reflective surfaces, treat a sensible area, listen to the change and then add more only if required. That approach gives a better result than covering every wall without a plan.

This was my first proper acoustic treatment for the design desk, so I started with a simple layout. I was looking for a solution that could soften the acoustics without turning the design desk into a technical-looking studio. The felt bulletin boards appealed to me because the treatment could become part of the interior rather than something I would want to hide. Before ordering, I spent time on the MMT Acoustix website comparing the use case, size and basic installation information. That helped set the right expectation: PET acoustic treatment is mainly about controlling reflections and reverberation inside the room, not creating a complete barrier against noise coming through walls, doors or windows. When the order arrived, the first thing I noticed was the consistency of the felt surface and the cut edges. I laid the pieces out on the floor before fixing anything so I could check spacing and alignment. That small step made the final installation look much more deliberate. The Pumice shade sits well with the rest of the interior. The 1 x 1 Feet format worked well for my layout, although I would recommend calculating actual coverage rather than estimating quantity only from a photograph of the wall. I also wanted the wall to remain practical, so the felt bulletin-board format was useful for notes and planning around the desk while giving the hard wall some acoustic softness. The acoustic change was easiest to notice during speech. The room has less lingering energy after a sentence, calls feel clearer, and sharp reflections are reduced. It is not silence and it is not soundproofing, but it is the kind of improvement I was actually trying to achieve. Packaging on my order was protective and the panels reached in usable condition. I also appreciated being able to speak with someone for a practical placement question instead of relying only on generic marketplace descriptions. There were cheaper felt products available online, but I was more comfortable buying from a company focused on acoustics. Once I considered the finish, product information, packaging and support, the pricing felt competitive rather than simply expensive. If I were doing the room again, I would start by identifying the most reflective surfaces, treat a sensible area, listen to the change and then add more only if required. That approach gives a better result than covering every wall without a plan.

My main goal was to make the home office calmer without making it look like a recording booth. The Pumice finish gave the wall enough contrast without looking loud. Installation was straightforward after marking the layout first. Surface preparation mattered more than I expected before fixing the panels. The panels gave the wall a more designed, architectural look. I also like that the felt surface works practically around the desk for notes while adding some acoustic softness to the wall.

I used these in my study corner after struggling with a fairly reflective room. I was looking for a solution that could soften the acoustics without turning the study corner into a technical-looking studio. The felt bulletin boards appealed to me because the treatment could become part of the interior rather than something I would want to hide. Before ordering, I spent time on the MMT Acoustix website comparing the use case, size and basic installation information. That helped set the right expectation: PET acoustic treatment is mainly about controlling reflections and reverberation inside the room, not creating a complete barrier against noise coming through walls, doors or windows. When the order arrived, the first thing I noticed was the consistency of the felt surface and the cut edges. I laid the pieces out on the floor before fixing anything so I could check spacing and alignment. That small step made the final installation look much more deliberate. The Pumice finish gave the wall enough contrast without looking loud. The 1 x 1 Feet format worked well for my layout, although I would recommend calculating actual coverage rather than estimating quantity only from a photograph of the wall. I also wanted the wall to remain practical, so the felt bulletin-board format was useful for notes and planning around the desk while giving the hard wall some acoustic softness. The acoustic change was easiest to notice during speech. The room has less lingering energy after a sentence, calls feel clearer, and sharp reflections are reduced. It is not silence and it is not soundproofing, but it is the kind of improvement I was actually trying to achieve. Packaging on my order was protective and the panels reached in usable condition. I also appreciated being able to speak with someone for a practical placement question instead of relying only on generic marketplace descriptions. There were cheaper felt products available online, but I was more comfortable buying from a company focused on acoustics. Once I considered the finish, product information, packaging and support, the pricing felt competitive rather than simply expensive. If I were doing the room again, I would start by identifying the most reflective surfaces, treat a sensible area, listen to the change and then add more only if required. That approach gives a better result than covering every wall without a plan.