Turbo® SR Adhesive Ultra Strong, Multi Purpose, 410 ml

Turbo® SR Adhesive Ultra Strong is a high-strength synthetic rubber adhesive for general installation work. It bonds acoustic and non-acoustic materials alike, holding heavier substrates such as SoundBlanket® MLV, BassBloc®, carpets, underlays and insulation where a foam-specific adhesive is not required.

Available in 410 ml, 5 L and 23 L containers.
Coverage is approximately 21 sq ft per litre on walls and 18 sq ft per litre on ceilings.
A 410 ml can covers roughly 8.6 sq ft on walls or 7.4 sq ft on ceilings.
To calculate what you need, divide your total area in square feet by 21 for walls or by 18 for ceilings. The result is the number of litres required.

Apply the adhesive to both surfaces, the back of the material and the wall or ceiling. Use a generous amount for best results. Press the two surfaces together firmly, hold for 10 seconds, then release and leave. No clamping or additional support is required. Work in a well-ventilated area.

Contains a strong odour. Ventilate the area for 24 hours after use. Store upright in a cool, dry place away from direct heat and open flame. Keep out of reach of children. Wash immediately with soap and water on contact with skin or eyes.Contains a strong odour. Ventilate the area for 24 hours after use. Store upright in a cool, dry place away from direct heat and open flame. Keep out of reach of children. Wash immediately with soap and water on contact with skin or eyes.